![]() ![]() | |||||
|
** Please note ** Our site is updated regularly, and our inventory is current. Please check back regularly to see what's new. All equipment is subject to prior sale and other disposition. The information given on this site is correct to the best of our knowledge and is provided without warranty of any kind. Jackson 3300 Pup Tamper Serial # 144035
We have another great deal on a Jackson Tamper. Pictures attached are of a Jackson 3300 Tamper located in LA. The Price of this unit is US$47,750.00.. The Engine on this unit runs real nice, vibrators operate as they should. The work heads are all working, good tamping feet, A/C cab working good, gauges working, lights working, no major leaks, needs work on either travel motor or pump. Machine is in fair condition overall. There are two vibrator housings missing, but these will be replaced when sold. As far as lights and Jacks, there are none 3300's were built as backup Tampers.
(1) New 8' x 12' Railroad Push cart
Cricket has (1) new push cart for sale in MN. This cart is in excellent condition and is 8' x 12' with a capacity of Capacity 40,000 The cart is equipped with Hydraulic Brakes, and External Grease Ports for each bearing. This cart will sell fast.
We have a 15" Side Dump Bed for sale.. These beds a commonly used on many of the Union Pacific Trucks. The bed is in excellent condition. Call and make me an offer.
(5) Complete Sets Wheels and Axles made by Habco
We have ( 5) complete sets of wheels and axles made by Habco, these sets are rated for 33,000lbs and are 14" in diameter and are standard gage. These would be excellent for push carts. Priced @ $4,250.00 each set.
We have a TR10 Wide Cab Tie Inserter for sale. The unit runs, needs an alternator, and bracket. The unit is all there looks good, just needs to be gone through. 471 Detroit Diesel. This unit was formally owned by CSX. The unit needs little to be put back into production, buy this unit and save thousands.
(4) Dymax 90 Degree Tie Inserter Attachments
We have acquired (4) Dymax Tie Inserter attachments for immediate sale... These are Dymax 90 Degree Tie Inserters with Wood and Concrete Pads. Some fit CAT 324/329 linkage and some fit CAT 320 linkage. They all have stands as well. They are all in excellent shape. Call for pricing and model numbers, these will not last call while I have them.
1993 Grove RTR58D Hy-Rail 20 Ton Crane
Here is a rare opportunity to purchase a excellent 1993 Grove RTR58D Hy-Rail 20 Ton Crane. This crane had a diesel 402 Series, and 60' of Boom, (2) Hoists, and a front mounted Braden Winch. The tires are 16x25 28 ply with approx 70% remaining. The Hy-Rail gear is made by Mitchell. This unit has the LMI ( PAT DS350 ) and a STB System. The hours on the unit are approx 5,500... this unit will sell fast call for details.
There are two sets consisting of two cars per set. Each set has a master and a slave. Each master has a diesel engine. Each car is equipped with (4) ballast doors, (2) doors inside the rail, (2) doors outside the rail. The cars are approx 9ft 3" wide, 10ft 10" long and 7ft 6" high.
We have a 441B Pettibone Speed Swing we have for sale, this unit has a excellent running 453 Detroit Diesel engine. This unit needs nothing and is in " Track Ready " condition and will goto work tomorrow. It is under 8'2" wide..so it would *NOT* be a permitted load. Unit has been currently used on the CN Mainline and operates excellent. Equipped with Heater and all working lights as well.
We have a (one of a kind). Low Railer It has the ability to be pulled down the highway as a normal lowboy and then be put on rail at any crossing. It is powered by a 190hp deutz and all hydrostatic power. It has 125K capacity while on the rail with capabilities of traveling up a 6% grade. There is no better unit or one like with the capacities in the market. This is huge for all departments of the railroads. This will eliminate all issues with getting into the places accessible by rail only.
(1) Used TKO ( Tie Extractor / Inserter )
We have a good running track ready TKO ( Tie Extractor / Inserter ) we are selling.. Seats are good, the rail wheels have hardly any wear, along with the brakes and , Shock absorbers. Tie Kicker is nice condition, Engine is clean, Oil is on the full mark. Hydraulic cooler is nice, This is a real tight exceptional machine. New Cylinder on the kicker. This unit has a 6 Cylinder Duitz air cooled engine. Unit was a Norfolk Southern unit. The unit number isTRI8608-P. All electrical looks nice, the clamp tables lock up and release nicely. Gauges are in grat condition as well, and covered with plastic to protect them. Unit weighs 23000LBS.
We have a Tamper Ballast Consolidator, Model CSC-2 and the Serial Number is 4481747. This unit is in work ready condition. This unit is located in Kentucky. Please call for price and more information.
Here is a MBTX we have available in the south. Unit has a Isuzu air cooled engine, and is in track ready condition... Needs batteries which we can provide.
2002 Cat 318 HY-Rail Excavator
We have a (1) 2002 Cat M318 with 8100 hrs with (Buckets) (1) Ditching Bucket aprrox 36" and (1) General Purpose Bucket. (DMF) Diversified Hy-Rail 90% or better. Plumbed for third valve. Tires are 90% or better. Unit is loaded. This Cat is located in Canada.
Transportation Resources Detachable Hydraulic driven Hi-rail System Cricket Enterprises has a set of Transportation Resources Detachable Hydraulic driven Hy-Rail gear we own and are selling. The gear was previously mounted on a Grove GMK 4100 100 Ton Crane and is in "like new" condition, the gear can be inspected in Bow NH.. Just take a look at the pictures. We have numerous engining sketches and information on this gear, that can be photo copied and sent to the interested buyer.. The gear has always been stored indoors and has been well taken care of... This is not you typical HY-Rail gear, this gear is extremely expensive new!!! The right person can save thousands on this gear ... Call for the specifications and details of this extremely rare gear.
| ||||
![]() | |||||